There are two sets of motor & gearbox on the power unit, driven by Schneider inverter synchronized. Under the basement, the travel device is driven by two sets of motor&gearbox working synchronized, to drive the unit move on rails.
Move-on-rails Welding Turning Roller Bed
There are two sets of motor & gearbox on the power unit, driven by Schneider inverter synchronized. Under the basement, the travel device is driven by two sets of motor&gearbox working synchronized, to drive the unit move on rails.
Our features:
- the rollers are PU, improve the transmission and driving capacity, extend the working life.
- All motors are frequency inverter motor.
- All the bearings are roller bearing which has strong capacity and resist impacting.
- All the shafts are tempered. Gears are quenched.
- The machine body is welded structure, stress released, body shot blasted and covered by anti-rust painting.
- All the shaft holes are machined to provide accuracy.
- The control system is composed by the cabinet and remote box. Schneider inverter and components are furnished to provide stable speed and working.
- Control cabinet is fixed on the machine body.
You may interest in other products:
Model |
Max loading |
Applied job dia |
Wheel dia. & width(mm) |
Wheel linear speed(mm/min) |
Motor power(kw) |
|
Rubber or PU |
Metal |
|||||
GK-5-M |
5000 |
Φ250-2300 |
Φ250*100 |
2*Φ240*20 |
100-1000 |
2×0.37 |
GK-10-M |
10000 |
Φ320-2800 |
Φ300*120 |
2*Φ290*25 |
2×0.55 |
|
GK-20-M |
20000 |
Φ500-3500 |
Φ350*120 |
2*Φ340*35 |
2×0.75 |
|
GK-40-M |
40000 |
Φ600-4200 |
Φ400*120 |
2*Φ390*45 |
2×1.5 |
|
GK-60-M |
60000 |
Φ750-4800 |
Φ450*120 |
2*Φ440*60 |
2×2.2 |
|
GK-80-M |
80000 |
Φ850-5000 |
Φ500*120 |
2*Φ490*70 |
2×3 |
|
GK-100-M |
100000 |
Φ1000-5500 |
Φ500*120 |
2*Φ490*100 |
2×4 |