Tower Shot Balsting Rotator
Tower Shot Balsting Rotator
This rotator is composed by one power unit, one idler unit, travel basement and control system. The tower is placed on PU rollers when do shot blasting,to avoid the shots entering the tower body.
This rotator is composed by one power unit, one idler unit, travel basement and control system. The tower is placed on PU rollers when do shot blasting,to avoid the shots entering the tower body.
The basement is with manual travel device, the rollers are adjusted by bolt shift. We use the floor plug for the machine, due to the long distance of blasting area. After the rotator move to the position, connect the power to the nearest plug on the floor, to avoid use too much cables.
The basement is with manual travel device, the rollers are adjusted by bolt shift. We use the floor plug for the machine, due to the long distance of blasting area. After the rotator move to the position, connect the power to the nearest plug on the floor, to avoid use too much cables.
Model |
Max loading |
Applied job dia |
Wheel dia. & width(mm) |
Wheel linear speed(mm/min) |
Motor power(kw) |
Rubber or PU |
|||||
GK-60-M |
60000 |
Φ750-4800 |
Φ450*200 |
100-1000 |
2×2.2 |
GK-80-M |
80000 |
Φ850-5000 |
Φ500*220 |
100-1000 |
2×3 |
GK-100-M |
100000 |
Φ1000-5500 |
Φ500*280 |
100-1000 |
2×4 |