H Beam Straightening Machine
H Beam Straightening Machine
This machine is mainly composed by motor & gear box, bottom straightening roll, upper straightening roll, distance adjust part, machine seat and electrical control cabinet.
Structures:
1)This machine is mainly composed by motor & gear box, bottom straightening roll, upper straightening roll, distance adjust part, machine seat and electrical control cabinet.
2)Straightening: Two upper rolls and one bottom rolls make a T position. The two upper rolls press on the flange side, and the bottom roll support in middle, with the motor driving, the rolls rolling over the flange to make the flange flat. It can do repeat straightening if one pass is not enough.
2)Straightening: Two upper rolls and one bottom rolls make a T position. The two upper rolls press on the flange side, and the bottom roll support in middle, with the motor driving, the rolls rolling over the flange to make the flange flat. It can do repeat straightening if one pass is not enough.
Main usage and range:
The welded H beam has deformation caused by the heat during welding. This machine a special equipment to straighten the deformation.
The working condition:
The working condition:
- Temperature: -15℃-40℃
- Humidity: ≤60%
Model |
JZ-20 |
JZ-40 |
Flange width |
150-600mm |
200-800mm |
Max Flange thickness |
20mm |
40mm |
Min web height |
160mm |
350mm |
Material |
Q235A |
Q235A |
Straightening speed |
5.7m/min |
18m/min |
Input conveyor |
6m |
6m |
Output conveyor |
6m |
6m |
Motor power |
9Kw |
25Kw |