H Beam Gantry Welding Machine
H Beam Gantry Welding Machine
This machine is furnished two submerged arc welders to weld two H beams at the same time.
Main parameters:
- Web height: 180-1500mm
- Web Thickness: 5-32mm
- Flange width: 180-800mm
- Flange thickness: 5-40mm
- Beam length: 4000-12000mm
- Welding speed: 150-2400mm/min
- Welding mode: Submerged Arc Welding
- Flux recycling: 100kg*2
- Main body power: 9Kw (excluding two welders)
- Gas pressure: 0.4-0.6Mpa
Supply range:
- Main body: Gantry, travel device, transverse sliding frame, wire feeder & accessories.
- Welding Arms and carriage: arms, electrical transmitting devices, sliding devices and accessories, two groups each
- Arc guider: Welding guns, mechanical adjusting devices, and arc guide frame, two groups each
- Flux recycling system: 100Kg recycler, separator, flux hopper, flux recycling and feeding pipe.
- Electrical control system: Electrical control box, 2pcs of Taiwan inverters, operation boxes, lights, alarming lights, etc.
- Pipes & wires system: Welder wires, control wires, welding cables, Gantry control cables, gas pipes, sliding wire hanger, etc.
- ◆Welding system: 2 complete sets of ZHENGZHONG MZ-1000 welders.
Model |
LHA |
LHT |
Applied flange width |
200-800mm/1000mm |
200-800mm/1000mm |
Applied web height |
200-1500mm |
200-2000mm |
Applied beam length |
4-15/18m |
4-15/18m |
Flux recovery sys |
100kg*2 |
100kg*2 |
Main machine power |
9kw(exclude welding power) |