This machine is composed by main body and pulling rod system, transmission system, input & output conveyor, hydraulic system and electrical system.
The main parts are welded structures with high strength and light. Main parts are stress released to avoid deformation.
Structures:
The main parts are welded structures with high strength and light. Main parts are stress released to avoid deformation.
The center location motion is driving by hydraulic system. The pulling rods make the plate center initially, the body assembly center and clamp the workpiece precisely. The whole procedure is controlled by pushbuttons on control cabinet, easy, convenient, and precise. The speed and pressure can be adjusted according to the beam size or worker’s skill. The assembly speed is inverter controlled and variable in range of 0.5-6m/min.
Features:
- This machine is hydraulic transmission with mechanical center location, which is special designed after widely research the market.
- The machine has location device to align the flange and web end.
Model |
Z15 |
Z18 |
Z20 |
Applied web height |
200-1500mm |
200-1800mm |
200-2000mm |
Applied web thickness |
6-50mm |
6-50mm |
6-50mm |
Applied flange width |
200-800mm/1000mm |
200-800mm/1000mm |
200-800mm /1000mm |
Applied flange thickness |
6-60mm |
6-60mm |
6-60mm |
Applied beam length |
4-15/18m |
4-15/18m |
4-15/18m |
Assembly speed |
0.5-6m/min |
0.5-6m/min |
0.5-6m/min |
Input conveyor |
2600mmx3 |
2600mmx3 |
2600mmx3 |
Output conveyor |
2600mmx3 |
2600mmx3 |
2600mmx3 |
Total power |
18.7+2x12.8Kw |
18.7+2x12.8Kw |
18.7+2x12.8Kw |